The Very Best Build Ebb And Flow Hydroponic System

Build Ebb And Flow Hydroponic System. Drill 2 holes in the bottom of the grow tray. In our build we use a ½ inch/13 mm bit for the water pump hose.

6 Plant Ebb & Flow (Flood And Drain) Hydroponic system
6 Plant Ebb & Flow (Flood And Drain) Hydroponic system from homehydrosystems.com

A system like this works best for plants smaller than 24 inches tall. How it works the plants are grown in rockwool blocks or small pots filled with hydrocorn. In our build we use a ½ inch/13 mm bit for the water pump hose.

How It Works The Plants Are Grown In Rockwool Blocks Or Small Pots Filled With Hydrocorn.

Build an ebb and flow hydroponic system! Place water pump in reservoir. Drill 2 holes in the bottom of the grow tray.

In Our Build We Use A ½ Inch/13 Mm Bit For The Water Pump Hose.

Drill holes in bottom of grow tray. The nutrient solution is stored in the reservoir and is pumped up to the tray with a submersible pump through the fill/drain fitting. A system like this works best for plants smaller than 24 inches tall.

Read Now :  The Very Best Duct Mounted Air Flow Sensor

Make Sure To Use The Correct Size Drill Bit For The Tube Connectors.

Leave a Reply

Your email address will not be published.